diff --git a/Makefile.am b/Makefile.am index 11d3eac..8a18646 100644 --- a/Makefile.am +++ b/Makefile.am @@ -115,7 +115,8 @@ bin_iscsi_test_SOURCES = test-tool/iscsi-test.c \ test-tool/0383_preventallow_target_warm_reset.c \ test-tool/0384_preventallow_target_cold_reset.c \ test-tool/0385_preventallow_lun_reset.c \ - test-tool/0386_preventallow_2_it_nexuses.c + test-tool/0386_preventallow_2_it_nexuses.c \ + test-tool/0390_mandatory_opcodes_sbc.c endif diff --git a/test-tool/0390_mandatory_opcodes_sbc.c b/test-tool/0390_mandatory_opcodes_sbc.c new file mode 100644 index 0000000..81e6b80 --- /dev/null +++ b/test-tool/0390_mandatory_opcodes_sbc.c @@ -0,0 +1,396 @@ +/* + Copyright (C) 2012 by Ronnie Sahlberg + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, see . +*/ + +#include +#include +#include "iscsi.h" +#include "scsi-lowlevel.h" +#include "iscsi-test.h" + +int T0390_mandatory_opcodes_sbc(const char *initiator, const char *url, int data_loss, int show_info) +{ + struct iscsi_context *iscsi; + struct scsi_task *task; + struct scsi_readcapacity16 *rc16; + struct scsi_inquiry_standard *inq; + int ret = 0, lun, sccs, encserv, lbpme; + unsigned char data[2048]; + uint32_t block_size; + uint64_t num_blocks; + int full_size; + + printf("0390_mandatory_opcodes_sbc:\n"); + printf("===========================\n"); + if (show_info) { + printf("Test support for all mandatory opcodes for SBC devices\n"); + printf("1, Verify FORMAT UNIT is available\n"); + printf("2, Verify INQUIRY is available\n"); + printf("3, Verify MAINTENANCE IN is available (if SCCS bit is set)\n"); + printf("4, Verify MAINTENANCE OUT is available (if SCCS bit is set)\n"); + printf("5, Verify READ CAPACITY10 is available\n"); + printf("6, Verify READ CAPACITY16 is available\n"); + printf("7, Verify RECEIVE DIAGNOSTIC RESULT is available (if ENCSERV bit is set)\n"); + printf("8, Verify REDUNDANCY GROUP IN is available (if SCCS bit is set)\n"); + printf("9, Verify REDUNDANCY GROUP OUT is available (if SCCS bit is set)\n"); + printf("10, Verify REPORT LUNS is available\n"); + printf("11, Verify REQUEST SENSE is available\n"); + printf("12, Verify SEND DIAGNOSTIC is available\n"); + printf("13, Verify SPARE IN is available (if SCCS bit is set)\n"); + printf("14, Verify SPARE OUT is available (if SCCS bit is set)\n"); + printf("15, Verify TEST UNIT READY is available\n"); + printf("16, Verify UNAMP is available (if LBPME bit is set)\n"); + printf("17, Verify VOLUME SET IN is available (if SCCS bit is set)\n"); + printf("18, Verify VOLUME SET OUT is available (if SCCS bit is set)\n"); + printf("19, Verify WRITE SAME16 is available (if LBPME bit is set)\n"); + printf("20, Verify WRITE SAME32 is available (if LBPME bit is set)\n"); + printf("\n"); + return 0; + } + + iscsi = iscsi_context_login(initiator, url, &lun); + if (iscsi == NULL) { + printf("Failed to login to target\n"); + return -1; + } + + /* find the size of the LUN */ + task = iscsi_readcapacity16_sync(iscsi, lun); + if (task == NULL) { + printf("Failed to send READCAPACITY16 command: %s\n", iscsi_get_error(iscsi)); + ret = -1; + goto finished; + } + if (task->status != SCSI_STATUS_GOOD) { + printf("READCAPACITY16 command: failed with sense. %s\n", iscsi_get_error(iscsi)); + ret = -1; + scsi_free_scsi_task(task); + goto finished; + } + rc16 = scsi_datain_unmarshall(task); + if (rc16 == NULL) { + printf("failed to unmarshall READCAPACITY16 data. %s\n", iscsi_get_error(iscsi)); + ret = -1; + scsi_free_scsi_task(task); + goto finished; + } + block_size = rc16->block_length; + num_blocks = rc16->returned_lba; + lbpme = rc16->lbpme; + scsi_free_scsi_task(task); + + /* See how big this inquiry data is */ + task = iscsi_inquiry_sync(iscsi, lun, 0, 0, 64); + if (task == NULL || task->status != SCSI_STATUS_GOOD) { + printf("Inquiry command failed : %s\n", iscsi_get_error(iscsi)); + return -1; + } + full_size = scsi_datain_getfullsize(task); + if (full_size > task->datain.size) { + scsi_free_scsi_task(task); + + /* we need more data for the full list */ + if ((task = iscsi_inquiry_sync(iscsi, lun, 0, 0, full_size)) == NULL) { + printf("Inquiry command failed : %s\n", iscsi_get_error(iscsi)); + return -1; + } + } + inq = scsi_datain_unmarshall(task); + if (inq == NULL) { + printf("failed to unmarshall inquiry datain blob\n"); + scsi_free_scsi_task(task); + return -1; + } + sccs = inq->sccs; + encserv = inq->encserv; + if (inq->periperal_device_type != SCSI_INQUIRY_PERIPHERAL_DEVICE_TYPE_DIRECT_ACCESS) { + printf("Not a SBC device. Skipping test\n"); + scsi_free_scsi_task(task); + goto finished; + } + + scsi_free_scsi_task(task); + + if (!data_loss) { + printf("--dataloss flag is not set. Skipping test\n"); + ret = -1; + goto finished; + } + + + + printf("Test FORMAT UNIT ... "); + printf("[TEST NOT IMPLEMENTED YET]\n"); + goto test2; + + +test2: + printf("Test INQUIRY ... "); + task = iscsi_inquiry_sync(iscsi, lun, 0, 0, 64); + if (task == NULL) { + printf("[FAILED]\n"); + printf("Failed to send INQUIRY command: %s\n", iscsi_get_error(iscsi)); + ret++; + goto test3; + } + if (task->status != SCSI_STATUS_GOOD) { + printf("[FAILED]\n"); + printf("INQUIRY command: failed with sense %s\n", iscsi_get_error(iscsi)); + ret++; + scsi_free_scsi_task(task); + goto test3; + } + scsi_free_scsi_task(task); + + printf("[OK]\n"); + +test3: + printf("Test MAINTENANCE IN ... "); + if (sccs == 0) { + printf("[SCCS == 0, SKIPPING TEST]\n"); + goto test4; + } + printf("[TEST NOT IMPLEMENTED YET]\n"); + goto test4; + + +test4: + printf("Test MAINTENANCE OUT ... "); + if (sccs == 0) { + printf("[SCCS == 0, SKIPPING TEST]\n"); + goto test5; + } + printf("[TEST NOT IMPLEMENTED YET]\n"); + goto test5; + +test5: + printf("Test READ CAPACITY10 ... "); + task = iscsi_readcapacity10_sync(iscsi, lun,0 ,0); + if (task == NULL) { + printf("[FAILED]\n"); + printf("Failed to send READ CAPACITY10 command: %s\n", iscsi_get_error(iscsi)); + ret++; + goto test6; + } + if (task->status != SCSI_STATUS_GOOD) { + printf("[FAILED]\n"); + printf("READ CAPACITY10 command: failed with sense %s\n", iscsi_get_error(iscsi)); + ret++; + scsi_free_scsi_task(task); + goto test6; + } + scsi_free_scsi_task(task); + + printf("[OK]\n"); + +test6: + printf("Test READ CAPACITY16 ... "); + task = iscsi_readcapacity16_sync(iscsi, lun); + if (task == NULL) { + printf("[FAILED]\n"); + printf("Failed to send READ CAPACITY16 command: %s\n", iscsi_get_error(iscsi)); + ret++; + goto test7; + } + if (task->status != SCSI_STATUS_GOOD) { + printf("[FAILED]\n"); + printf("READ CAPACITY16 command: failed with sense %s\n", iscsi_get_error(iscsi)); + ret++; + scsi_free_scsi_task(task); + goto test7; + } + scsi_free_scsi_task(task); + + printf("[OK]\n"); + +test7: + printf("Test RECEIVE DIAGNOSTIC RESULT ... "); + if (encserv == 0) { + printf("[ENCSERV == 0, SKIPPING TEST]\n"); + goto test8; + } + printf("[TEST NOT IMPLEMENTED YET]\n"); + goto test8; + + +test8: + printf("Test REDUNDANCY GROUP IN ... "); + if (sccs == 0) { + printf("[SCCS == 0, SKIPPING TEST]\n"); + goto test9; + } + printf("[TEST NOT IMPLEMENTED YET]\n"); + goto test9; + + +test9: + printf("Test REDUNDANCY GROUP OUT ... "); + if (sccs == 0) { + printf("[SCCS == 0, SKIPPING TEST]\n"); + goto test10; + } + printf("[TEST NOT IMPLEMENTED YET]\n"); + goto test10; + +test10: + printf("Test REPORT LUNS ... "); + task = iscsi_reportluns_sync(iscsi, 0, 64); + if (task == NULL) { + printf("[FAILED]\n"); + printf("Failed to send REPORT LUNS command: %s\n", iscsi_get_error(iscsi)); + ret++; + goto test11; + } + if (task->status != SCSI_STATUS_GOOD) { + printf("[FAILED]\n"); + printf("REPORT LUNS command: failed with sense %s\n", iscsi_get_error(iscsi)); + ret++; + scsi_free_scsi_task(task); + goto test11; + } + scsi_free_scsi_task(task); + + printf("[OK]\n"); + +test11: + printf("Test REQUEST SENSE ... "); + printf("[TEST NOT IMPLEMENTED YET]\n"); + goto test12; + +test12: + + printf("Test SEND DIAGNOSTIC ... "); + printf("[TEST NOT IMPLEMENTED YET]\n"); + goto test13; + +test13: + printf("Test SPARE IN ... "); + if (sccs == 0) { + printf("[SCCS == 0, SKIPPING TEST]\n"); + goto test14; + } + printf("[TEST NOT IMPLEMENTED YET]\n"); + goto test14; + + +test14: + printf("Test SPARE OUT ... "); + if (sccs == 0) { + printf("[SCCS == 0, SKIPPING TEST]\n"); + goto test15; + } + printf("[TEST NOT IMPLEMENTED YET]\n"); + goto test15; + +test15: + printf("Test TEST UNIT READY ... "); + task = iscsi_testunitready_sync(iscsi, lun); + if (task == NULL) { + printf("[FAILED]\n"); + printf("Failed to send TEST UNIT READY command: %s\n", iscsi_get_error(iscsi)); + ret++; + goto test11; + } + if (task->status != SCSI_STATUS_GOOD) { + printf("[FAILED]\n"); + printf("TEST UNIT READY command: failed with sense %s\n", iscsi_get_error(iscsi)); + ret++; + scsi_free_scsi_task(task); + goto test16; + } + scsi_free_scsi_task(task); + + printf("[OK]\n"); + +test16: + printf("Test UNMAP ... "); + if (lbpme == 0) { + printf("[LBPME == 0, SKIPPING TEST]\n"); + goto test17; + } + task = iscsi_unmap_sync(iscsi, lun, 0, 0, NULL, 0); + if (task == NULL) { + printf("[FAILED]\n"); + printf("Failed to send UNMAP command: %s\n", iscsi_get_error(iscsi)); + ret++; + goto test17; + } + if (task->status != SCSI_STATUS_GOOD) { + printf("[FAILED]\n"); + printf("UNMAP command: failed with sense %s\n", iscsi_get_error(iscsi)); + ret++; + scsi_free_scsi_task(task); + goto test17; + } + scsi_free_scsi_task(task); + + printf("[OK]\n"); + +test17: + printf("Test VOLUME SET IN ... "); + if (sccs == 0) { + printf("[SCCS == 0, SKIPPING TEST]\n"); + goto test18; + } + printf("[TEST NOT IMPLEMENTED YET]\n"); + goto test18; + + +test18: + printf("Test VOLUME SET OUT ... "); + if (sccs == 0) { + printf("[SCCS == 0, SKIPPING TEST]\n"); + goto test19; + } + printf("[TEST NOT IMPLEMENTED YET]\n"); + goto test19; + +test19: + printf("Test WRITE SAME16 ... "); + if (lbpme == 0) { + printf("[LBPME == 0, SKIPPING TEST]\n"); + goto test20; + } + task = iscsi_writesame16_sync(iscsi, lun, data, block_size, 0, 1, 0, 1, 0, 0, 0, 0); + if (task == NULL) { + printf("[FAILED]\n"); + printf("Failed to send WRITE SAME16 command: %s\n", iscsi_get_error(iscsi)); + ret++; + goto test20; + } + if (task->status != SCSI_STATUS_GOOD) { + printf("[FAILED]\n"); + printf("WRITE SAME16 command: failed with sense %s\n", iscsi_get_error(iscsi)); + ret++; + scsi_free_scsi_task(task); + goto test20; + } + scsi_free_scsi_task(task); + + printf("[OK]\n"); + +test20: + printf("Test WRITE SAME32 ... "); + printf("[TEST NOT IMPLEMENTED YET]\n"); + goto test21; + +test21: + +finished: + iscsi_logout_sync(iscsi); + iscsi_destroy_context(iscsi); + return ret; +} diff --git a/test-tool/iscsi-test.c b/test-tool/iscsi-test.c index faa1b86..3301502 100644 --- a/test-tool/iscsi-test.c +++ b/test-tool/iscsi-test.c @@ -183,6 +183,9 @@ struct scsi_test tests[] = { { "T0385_preventallow_lun_reset", T0385_preventallow_lun_reset }, { "T0386_preventallow_2_itl_nexuses", T0386_preventallow_2_itl_nexuses }, +/* support for mandatory opcodes*/ +{ "T0390_mandatory_opcodes_sbc", T0390_mandatory_opcodes_sbc }, + { NULL, NULL } }; diff --git a/test-tool/iscsi-test.h b/test-tool/iscsi-test.h index 76db0d1..ff34631 100644 --- a/test-tool/iscsi-test.h +++ b/test-tool/iscsi-test.h @@ -135,3 +135,5 @@ int T0383_preventallow_target_warm_reset(const char *initiator, const char *url, int T0384_preventallow_target_cold_reset(const char *initiator, const char *url, int data_loss, int show_info); int T0385_preventallow_lun_reset(const char *initiator, const char *url, int data_loss, int show_info); int T0386_preventallow_2_itl_nexuses(const char *initiator, const char *url, int data_loss, int show_info); + +int T0390_mandatory_opcodes_sbc(const char *initiator, const char *url, int data_loss, int show_info);