Hit iser hang in rdma_destroy_id with trace:
#0 pthread_cond_wait@@GLIBC_2.3.2 () at ../sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
#1 0x00007f96ecbbcbb3 in rdma_destroy_id () from /usr/lib/librdmacm.so.1
#2 0x00005632027311d4 in iser_conn_release (iser_conn=iser_conn@entry=0x7f96d4027440) at iser.c:261
#3 0x0000563202731428 in iscsi_iser_connect (iscsi=0x563205206c70, sa=<optimized out>, ai_family=<optimized out>)
at iser.c:1516
#4 0x000056320273dd3c in iscsi_connect_async (iscsi=iscsi@entry=0x563205206c70,
portal=portal@entry=0x563205207084 "210.32.124.205:3260", cb=cb@entry=0x56320272b220 <iscsi_connect_cb>,
private_data=private_data@entry=0x7f96d4008b00) at socket.c:389
#5 0x000056320272b325 in iscsi_full_connect_async (iscsi=0x563205206c70,
portal=0x563205207084 "210.32.124.205:3260", lun=1, cb=cb@entry=0x56320272aef0 <iscsi_reconnect_cb>,
private_data=private_data@entry=0x0) at connect.c:230
#6 0x000056320272b711 in iscsi_reconnect (iscsi=<optimized out>) at connect.c:473
#7 0x00005632026810a8 in iscsi_timed_check_events (opaque=0x563205206ae0) at block/iscsi.c:387
Currently use pthread_cancel to kill cmthread forcefully, cmthread may
exits without rdma_ack_cm_event, then unacknowledged event will be
remained in librdmacm. rdma_destroy_id hangs until uplayer ack all
the cm event.
Since destroying qp, cm thread will handle DISCONNECTED event, and
exits by itself. Joining cm thread to wait cm thread to exit
gracefully.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Hit the crash stack:
#0 iser_initialize_headers (iser_pdu=0x7f1a3404ef50, iser_conn=0x0) at iser.c:514
#1 iscsi_iser_send_pdu (iscsi=0x7f1a3406d700, pdu=0x7f1a3404ef50) at iser.c:714
#2 0x000055e3160f0157 in iscsi_scsi_command_async (iscsi=0x7f1a3406d700, iscsi@entry=0x55e317fbcc70,
lun=lun@entry=1, task=task@entry=0x7f1a34026610, cb=cb@entry=0x55e316044c10 <iscsi_co_generic_cb>,
d=d@entry=0x7f15feeb7710, private_data=private_data@entry=0x7f15feeb77e0) at iscsi-command.c:282
#3 0x000055e3160f1616 in iscsi_write10_iov_task (iscsi=0x55e317fbcc70, lun=1, lba=lba@entry=10401896,
data=data@entry=0x0, datalen=4096, blocksize=<optimized out>, wrprotect=0, dpo=0, fua=0, fua_nv=0,
group_number=0, cb=0x55e316044c10 <iscsi_co_generic_cb>, private_data=0x7f15feeb77e0, iov=0x7f1a34042090,
niov=1) at iscsi-command.c:1107
#4 0x000055e31604680f in iscsi_co_writev (bs=<optimized out>, sector_num=<optimized out>,
nb_sectors=<optimized out>, iov=0x7f1a3404e380, flags=<optimized out>) at block/iscsi.c:640
#5 0x000055e31601e89c in bdrv_driver_pwritev (bs=bs@entry=0x55e317fb6570, offset=offset@entry=5325770752,
bytes=bytes@entry=4096, qiov=qiov@entry=0x7f1a3404e380, qiov_offset=qiov_offset@entry=0, flags=flags@entry=0)
at block/io.c:1220
The reason is that during async reconnection, before reconnecting
call back function gets woked, we have closed the old connection,
and the new connection is not ready.
At the same time, up layer still sends pdu to the old iscsi context.
In this patch, before reconnecting successfully, just add the pdu to
waitpdu without sending.
Suggested by Bart, do not show iser related log here.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
[ bvanassche: reformatted patch ]
Checking whether a pointer is NULL after it has been dereferenced is not
useful. This was detected by Coverity.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reduce the size of struct iscsi_context by reordering the members of this
data structure. Additionally, change the rdma_ack_timeout value from
'unsigned char' into 'uint8_t' to make it clear that this variable
represents an integer.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Since 2c1619edef61a03cb516efaa81750784c3071d10 for linux kernel and
55843c4ab8f559679d28c559cc4d681836be769b for rdma-core, rdma cma
supports RDMA_OPTION_ID_ACK_TIMEOUT. It's useful for RDMA out of
sequence case. Because this feature is added recently, we have to
check this in autogen.sh before building source code.
Depend on production enviroument, tunning rdma ack timeout could get
the best performance. Suggested by Bart and Ronnie, instead of using
a fixed timeout value, add two methods to set rdma ack timeout value.
1, add URL variable 'LIBISCSI_RDMA_ACK_TIMEOUT'. This could works
for a specified connection.
2, add env argument 'LIBISCSI_RDMA_ACK_TIMEOUT'. This works as a
common setting for all the connection of a process.
Test under different packet loss rate and different ack timeout, run
fio (iodepth=1) in a guest os, I got this result:
latency under packet loss rate 0.00001:
timeout 19: avg 170.22, pct99.9 215
timeout 10: avg 160.08, pct99.9 215
timeout 8 : avg 146.39, pct99.9 177
timeout 7 : avg 148.37, pct99.9 211
latency under packet loss rate 0.0001:
timeout 19: avg 949.23, pct99.9 306
timeout 10: avg 818.53, pct99.9 378
timeout 8 : avg 615.84, pct99.9 189
timeout 7 : avg 618.89, pct99.9 310
Base on this test report, setting ack timeout to 8(1048.576 usec) is
a good choice in my test enviroument.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
After iser reconnects successfully, iser drive should close old
connection and release resources.
Fix resource leak in this patch, and test a lot, this patch works
fine.
Test env:
192.168.122.204: run as a software gateway
192.168.122.205: run iser target, default gateway 192.168.122.204
192.168.122.206: run QEMU as intiator, default gateway 192.168.122.204
run script on 192.168.122.204:
for i in `seq 1 100`
do
iptables -s 192.168.122.205/32 -A FORWARD -m statistic --mode random --probability 1 -j DROP
iptables -s 192.168.122.206/32 -A FORWARD -m statistic --mode random --probability 1 -j DROP
sleep 30
iptables -F
sleep 30
done
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
If a thread is created without any attr, it works in attached mode.
It means that we need run pthread_join to relaim stack of thread.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Hit segfault at iser_reg_mr during attaching disk with backtrace:
#0 0x000055ace9635b0f in iser_reg_mr (iser_conn=0x55aceca33820) at iser.c:1060
#1 iser_connected_handler (cma_id=<optimized out>) at iser.c:1300
#2 iser_cma_handler (event=0x7f29ef1f7950, cma_id=<optimized out>, iser_conn=0x55aceca33820) at iser.c:1326
#3 cm_thread (arg=0x55aceca33820) at iser.c:1380
#4 0x00007f2e2c31c4a4 in start_thread (arg=0x7f29ef1f8700) at pthread_create.c:456
#5 0x00007f2e2c05ed0f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:97
(gdb) p *iser_conn->tx_desc
Cannot access memory at address 0x20
This issue can be reproduced easily by attaching several disks of iser
protocol:
# virsh attach-device stretch iser0.xml
# virsh attach-device stretch iser1.xml
...
Initialize instances with zero to avoid random value pointer.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
libiscsi is usually linked by QEMU, and QEMU sets thread proc name
by function. But iser cm thread is created by libiscsi privately,
QEMU can't set this thread. After attaching a iser disk, we can find
a new thread 'qemu-system-x86' in QEMU process.
With this patch, iser cm thread works with thread name
'iscsi_cm_thread'.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
A PDU is sent directly in iscsi_iser_queue_pdu even if the cmdsn of
it exceeds maxcmdsn, and it may be ignored by the target.
Signed-off-by: wanghonghao <wanghonghao@bytedance.com>
When ImmediateData=Yes, DataSegmentLength is set in iSCSI layer
but immediate data is not sent in the RCaP message.
Signed-off-by: wanghonghao <wanghonghao@bytedance.com>
Discovered this while running iSCSI.iSCSITMF AbortTaskSimpleAsync
test case. For Task Management command iser_pdu->iscsi_pdu.scsi_cbdata
is not set. When test case tries to send Task Management command
via common API iser_send_command() - it calls overflow_data_size
which tries to dereference scsi_cbdata leading to SEGFAULT.
Added a non-NULL check for scsi_cbdata before accessing it.
Added support for negotiating below keys:
RDMAExtensions, TargetRecvDataSegmentLength, and
InitiatorRecvDataSegmentLength.
These are required to support iSER. See RFC5046 Section 6.
The old code is effectively always posting iser_conn->min_posted_rx
descriptors, since it is
if (outstanding + iser_conn->min_posted_rx <= iser_conn->qp_max_recv_dtos) {
if(iser_conn->qp_max_recv_dtos - outstanding > iser_conn->min_posted_rx)
count = iser_conn->min_posted_rx;
else
count = iser_conn->qp_max_recv_dtos - outstanding;
which is equivalent to
if(iser_conn->qp_max_recv_dtos - outstanding >= iser_conn->min_posted_rx)
if(iser_conn->qp_max_recv_dtos - outstanding > iser_conn->min_posted_rx)
count = iser_conn->min_posted_rx;
else
count = iser_conn->min_posted_rx;
So the "if" is redundant and the "min_posted_rx" is actually behaving more
like a _maximum_ number of posted descriptors in one iser_post_recvm.
Fix it with the (presumably) intended logic and remove a goto along
the way.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code was implicitly dependent on container_of from
inifiniband/verbs.h, however that's been removed in rdma-core
latest release:
ce0274acff
Define container_of locally if it's not already defined
Win32 has been rotting for a while. This patch adds vs17 build files
as well as fixing up all build errors that have accumulated.
There are still build warnings but those can be addressed in a followup
patch.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
This splits a transport into static driver specific functions for the common
iscsi commands. Optionally, a driver specific opaque memory is introduced
which is currently only used by iSER transport.
Last a lot of functions changed to static.
Signed-off-by: Peter Lieven <pl@kamp.de>
This commit includes all iSER implementation in libscsi
library and utilities.
Also, adding iser option in url.
Change-Id: I55ca8a9d4db802e72eb991061260dbb0bd0ef9ba
Signed-off-by: Roy Shterman <roysh@mellanox.com>
