if we drop a PDU which has a callback we should invoke it otherwise
the caller may wait infinetely for a command completion.
Signed-off-by: Peter Lieven <pl@kamp.de>
This seriously breaks qemu NOP timeouts and probably other things.
The reason is that the
define ISCSI_PDU_ERROR_ON_RECONNECT 0x00000016
is masking bits 0x2 and 0x4 as well.
Correctly it should read:
define ISCSI_PDU_ERROR_ON_RECONNECT 0x00000010
However, the better solution for this approach is invoke all callbacks
of PDUs which carry the ISCSI_PDU_DROP_ON_RECONNECT flag. This will
make sure that callbacks of whatever sync tasks are invoked.
This reverts commit 0407cf6aed.
Certain iSCSI commands such as NOP and LOGOUT commands are discarded instead
of re-queued when we have a session failure and reconnect.
Change the LOGOUT command to instead fail with SCSI_STATUS_ERROR when this
happens.
Otherwise, IF we are in iscsi_logout_sync() and we get a session failure
at the same-ish time we may end up automatically re-connecting the
session, but since we have discarded the logout command we will never
get a reply and will hang indefinitely in the event loop for synchronous
commands.
Arguably, we could also just return SCSI_STATUS_GOOD here since
when we perform a logout, we probably don't care too much about how we
disconnected from the server, only that we did disconnect from the server.
That is academic anyway since this only affects the sync API which is only
meant for trivial applications, which will likely not inspect the result
and just do a:
...
iscsi_logout_sync()
iscsi_destroy_context()
...
anyway.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
During reconnect we normally defer any SCSI commands that are issued
to be queued and sent later, once the re-connect has completed and we have
swapped the contexts.
This is what we want for almost all situations, except when we are
reconnecting very simple applications which request "no ua on reconnect".
For these applications we want to actually send the TURs that are used
during the login phase on the temporary context.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Normal applications want the current behaviour where we have the library
consume any/all of the UnitAttentions that the target may have queued on the
initial connection, but when we reconnect the session after a failure the
library will pass all the UAs back to the application to process.
Some applications, such as the test suite or really trivial applications
might not want to have to deal with handling of UAs and just "make it work".
Those applications can now request that upon any reconnection of the session
that libiscsi will automatically consume any and all UAs and hide them from
the application.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Only use TUR to eat any pending unit attentions on the initial connect
but not during reconnect.
From Peter Lieven <pl@kamp.de>
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
this variable was introduced for iscsi-test-cu only. This patch
makes it a generic environment variable that can be set per context.
Signed-off-by: Peter Lieven <pl@kamp.de>
Before b152d26 it was possible to set iscsi->reconnect_max_retries to 0.
This allowed reconnects, but aborted as soon as the reconnect failed.
The same behaviour is currenltly only possible by setting iscsi->reconnect_max_retries
to 1. iscsi->reconnect_max_retries == 0 forbids reconnecting completly.
Signed-off-by: Peter Lieven <pl@kamp.de>
If we are reconnecting and the connection is already established we
end up looping forever if there is a socket error before we finish
the login process. Fix this by invoking the reconnect callback if
there is an error and no new reconnect is scheduled.
Signed-off-by: Peter Lieven <pl@kamp.de>
those are part of the login process to consume UNIT_ATTENTIONS.
Its questionable if we should consume them at all, but iff we change
that behaviour we should do it for the initial login as well as
for a reconnect.
Signed-off-by: Peter Lieven <pl@kamp.de>
iscsi-ls show luns command does not work when the target redirects at login.
to avoid redundant code allow iscsi_full_connect_async to skip the testunit ready
part.
Signed-off-by: Peter Lieven <pl@kamp.de>
We allowed iscsi to be NULL in iscsi_parse_url. Especially
qemu does this and currently segfaults at start. Change the
usage guidelines for target username/password to be the same
as for chap username/password.
Signed-off-by: Peter Lieven <pl@kamp.de>
The only PDU type that does not have ISCSI_PDU_DROP_ON_RECONNECT is the
SCSI COMMAND PDU. Thsi is the only PDU that we re-queue on reconnect.
All other, including DATA-OUT, NOP, task management, PDUs are simply
dropped.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
This is a bug that has been there a long time.
When we reconnect and requeue a PDU we must reset the iovectors
for the task. Otherwise, any partially sent/received data when the
command is reconnected would end up containing garbage.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Rework the reconnect logic so we just call iscsi_scsi_command_async()
for the scsi commands we are re-quining instead of poking into the
private fields of the structures themself.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
We write unsolicited data-out PDUs from two places;
when we originally write the command in iscsi_scsi_command_async()
but also when we re-queue the PDUs during a session reconnect.
The re-queuing during the session re-connect was recently (almost) fixed
but was still buggy in that it did not correctly clamp the amount of written
data as per first burst length restriction.
This attempts to fix that.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
If we have writes that do not have the Final bit set during reconnect
we must send out any missing data-out PDU.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Lets not use a whitelist of UnitAttentions that we consume during the connect
phase. Instead we can just loop and fail after the 10th.
If there are more than 10 UAs then we have a problem, otherwise
just consume them all, forget them and then pass control back to the caller.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Rename the macros for managing the linked lists from SLIST_* to ISCSI_LIST_*
to avoid a clash on *BSD which already have other macros SLIST_*
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Makes it clearer that logging has to be done on the existing context,
since the "iscsi" pointer will not survive iscsi_reconnect.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes the following Valgrind complaint:
Invalid read of size 4
at 0x524A858: iscsi_reconnect (connect.c:378)
by 0x5258794: iscsi_service (socket.c:707)
by 0x52599C4: event_loop (sync.c:67)
by 0x525AFD7: iscsi_reserve6_sync (sync.c:1096)
by 0x40A40A: reserve6 (iscsi-support.c:3291)
by 0x422C95: test_reserve6_target_warm_reset (test_reserve6_target_warm_reset.c:39)
by 0x503B05F: ??? (in /usr/lib/libcunit.so.1.0.1)
by 0x503B375: ??? (in /usr/lib/libcunit.so.1.0.1)
by 0x503B69F: CU_run_all_tests (in /usr/lib/libcunit.so.1.0.1)
by 0x403171: main (iscsi-test-cu.c:1258)
Address 0x6443958 is 3,032 bytes inside a block of size 4,120 free'd
at 0x4C2B83A: free (vg_replace_malloc.c:468)
by 0x524A846: iscsi_reconnect (connect.c:374)
by 0x5258794: iscsi_service (socket.c:707)
by 0x52599C4: event_loop (sync.c:67)
by 0x525AFD7: iscsi_reserve6_sync (sync.c:1096)
by 0x40A40A: reserve6 (iscsi-support.c:3291)
by 0x422C95: test_reserve6_target_warm_reset (test_reserve6_target_warm_reset.c:39)
by 0x503B05F: ??? (in /usr/lib/libcunit.so.1.0.1)
by 0x503B375: ??? (in /usr/lib/libcunit.so.1.0.1)
by 0x503B69F: CU_run_all_tests (in /usr/lib/libcunit.so.1.0.1)
by 0x403171: main (iscsi-test-cu.c:1258)
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
in case the maximum number of reconnects is limited with
iscsi_set_reconnect_max_retries() the an iscsi_context
is leaked if the limit is exhausted.
Signed-off-by: Peter Lieven <pl@kamp.de>
If the amount of reconnects is limited with iscsi_set_reconnect_max_retries()
it might happen that iscsi_reconnect is called while there is already a deferred
reconnect.
Signed-off-by: Peter Lieven <pl@kamp.de>
We first merge waitpdu and outqueue queues and then requeue
the elements. iscsi_add_to_outqueue() will sort them accordingly
so this is no problem.
Signed-off-by: Peter Lieven <pl@kamp.de>
We where modifying out_offset and out_len in iscsi_write_to_socket().
If the packet that was being sent before reconnect was a write command
the was a significant change that out_offset and out_len where already
touched. When requeing the packet after reconnect we where
sending garbage!
Signed-off-by: Peter Lieven <pl@kamp.de>
Just like DATA_OUT we should just discard NOPs instead of requeueing them
on session reconnect.
Add new flag that to indicate this behaviour on reconnect and set it for
both data out and nops
In specific situation it might be useful to give up if a reconnect
is not successful or after a given number reconnect retries.
This patch adds the ability to change that. The default remains
the same: retry forever.
Signed-off-by: Peter Lieven <pl@kamp.de>
