Check that the Persistent Reserve In REPORT CAPABILITIES response
carries valid LENGTH, ALLOW COMMANDS, and PERSISTENT RESERVATION TYPE
MASK fields.
Signed-off-by: David Disseldorp <ddiss@suse.de>
- Replace some u_int32_t with uint32_t
- Portability fixes to iscsi-perf
- Improved documentation for the tests in README
- Add/fix support for setting task/pdu timeouts and add unit tests for it.
- Add multipath helpers for the test suite and add a simple multipath test
- Skip sending TUR during reconnect, since it can cause the connection to
- hang.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Add a test to verify the pdu timeout handling.
Fix numerous bugs in the timeout handling. It was really broken.
Add test for non-SCSI task PDUs too and verify they works.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
- Add support to use /dev/* nodes instead of just iscsi devices.
- Create a dedicated test for the FUA/DPO flags
- Allow reusing the context after disconnect
- Fix non-randomness in rand_key()
- Add iscsi-perf tool
- Fix length bug when sending unsolicited data in iscsi_command
- Reqrite the reconnect logic to begome fully async
- Fix wrong checks for username in CHAP
- Support Bidirectional CHAP
- Improve handling of IMMEDIATE bit
- Cmdsn, statsn fixes+
- iscsi_which_events can return 0, which means that there are no events right
now but try again in a second or so.
- Ignore any ASYNC EVENTS we receive since we can not yet pass them back to
the application.
- Add initial make test support
- Various minor fixes to libiscsi and the test suite
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
this variable was introduced for iscsi-test-cu only. This patch
makes it a generic environment variable that can be set per context.
Signed-off-by: Peter Lieven <pl@kamp.de>
Extend struct scsi_sense with sense specific descriptor information,
introduce the function scsi_parse_sense_data() and let that function
parse the sense specific descriptor.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Disable memory caching in libiscsi if the environment variable
LIBISCSI_CACHE_ALLOCATIONS has been set to zero. This makes
Valgrind reports more meaningful.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
If we are reconnecting and the connection is already established we
end up looping forever if there is a socket error before we finish
the login process. Fix this by invoking the reconnect callback if
there is an error and no new reconnect is scheduled.
Signed-off-by: Peter Lieven <pl@kamp.de>
We allowed iscsi to be NULL in iscsi_parse_url. Especially
qemu does this and currently segfaults at start. Change the
usage guidelines for target username/password to be the same
as for chap username/password.
Signed-off-by: Peter Lieven <pl@kamp.de>
This is a bug that has been there a long time.
When we reconnect and requeue a PDU we must reset the iovectors
for the task. Otherwise, any partially sent/received data when the
command is reconnected would end up containing garbage.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Rework the reconnect logic so we just call iscsi_scsi_command_async()
for the scsi commands we are re-quining instead of poking into the
private fields of the structures themself.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Remove iscsi_allocate_pdu() which is just a wrapper.
Rename iscsi_allocate_pdu_with_itt_flags() to iscsi_allocate_pdu()
and update all callers.
This only removes a wrapper function and contains no logic changes.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
We write unsolicited data-out PDUs from two places;
when we originally write the command in iscsi_scsi_command_async()
but also when we re-queue the PDUs during a session reconnect.
The re-queuing during the session re-connect was recently (almost) fixed
but was still buggy in that it did not correctly clamp the amount of written
data as per first burst length restriction.
This attempts to fix that.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
If we have writes that do not have the Final bit set during reconnect
we must send out any missing data-out PDU.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Add 0x2701/0x2702 to the list of valid ASCQ values we accept for devices
that are write protected.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
From the SPC-4 paragraph about WRITE SAME(10): "The WRITE SAME (10)
command requests that the device server transfer a single logical
block from the Data-Out Buffer [ ... ]". Hence always pass a data
buffer when sending a WRITE SAME(10) command.
Set the NDOB bit in the WRITE SAME(16) command if no data out buffer
is present.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
RFC 3720 is not clear about whether a target should return SUCCESS
or CHECK CONDITION if SPDTL > EDTL. Hence accept both. See also
Fred Knight, Re: [Ips] Data Out residual overflow/underflow handling,
IETF mailing list archive, 21 September 2012
(http://www.ietf.org/mail-archive/web/ips/current/msg02756.html).
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Since writing headers and payload in a single iov has never been
implementend and after thinking about it several times seems to
be very hairy I would like to revert this change since
the original implementation is in O(1) while the changed one
is in O(n). This results in a complexity of O(n^2) instead of
O(n) for the whole send operation.
This reverts commit 06eab264f6.
Rename the macros for managing the linked lists from SLIST_* to ISCSI_LIST_*
to avoid a clash on *BSD which already have other macros SLIST_*
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Some targets return multiple TargetAddress for individual targets.
Create a linked list of addresses for each target instead of
failing the discovery process when this happens.
