Make sure that the end-of-LUN test happens at the end of the LUN instead
of at the start of the LUN.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Since the argument num_blocks - i is passed as the LBA argument
to COMPAREANDWRITE(), avoid that a negative number is passed.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
2e947cc1de added logic to check that
targets missing zero block writesame support return INVALID_FIELD_IN_CDB
to such requests. However, this change incorrectly set the writesame
number_of_logical_blocks field to one.
Signed-off-by: David Disseldorp <ddiss@suse.de>
<iscsi-url> parameter absent handled for SCSI devices.
* Verbose logging segfault fixed.
* For ioctl case, if reservation conflicts hits it is not considered as
test case failure.
Since the data in the read buffer is not valid if READ10() failed,
only compare the data in the read buffer if READ10() succeeded.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Using any of the CU_ASSERT macros after a test has finished causes
the test tool to abort. This patch adds an iSCSI logout to two tests
to avoid that the test tool aborts e.g. as follows:
==11578== Process terminating with default action of signal 6 (SIGABRT)
==11578== at 0x54BB77F: raise (raise.c:58)
==11578== by 0x54BD379: abort (abort.c:89)
==11578== by 0x54B3B46: __assert_fail_base (assert.c:92)
==11578== by 0x54B3BF1: __assert_fail (assert.c:101)
==11578== by 0x504213E: CU_assertImplementation (in /usr/lib/x86_64-linux-gnu/libcunit.so.1.0.1)
==11578== by 0x16FA36: test_async_abort_cb (test_async_abort_simple.c:67)
==11578== by 0x5274B82: iscsi_process_task_mgmt_reply (task_mgmt.c:100)
==11578== by 0x525E226: iscsi_process_pdu (pdu.c:598)
==11578== by 0x526F2AA: iscsi_read_from_socket (socket.c:677)
==11578== by 0x5270015: iscsi_tcp_service (socket.c:963)
==11578== by 0x52700A5: iscsi_service (socket.c:980)
==11578== by 0x52707E1: event_loop (sync.c:69)
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Avoid that the test tool crashes due to a NULL pointer dereference
if unmarshalling the Data-In buffer fails.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
We do need a default: arm here as the switch is not supposed to deal with
all possible values for the enum.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
From SBC-4: BYTCHK = 0 means that the Data-Out buffer contents
must not be used. BYTCHK = 1 means that the Data-Out buffer must
be compared against the data on the storage medium. Hence set
BYTCHK to 1 if EDTL != 0.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
This patch avoids that Valgrind complains about the memset() call
that was used to initialize the array that it triggers an invalid
write.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
With SPC-4, the 0xE4 descriptor LU ID TYPE field should be ignored, and
the NUL bit is obsolete. Update the ValidTgtDescr accordingly.
Signed-off-by: David Disseldorp <ddiss@suse.de>
ExtendedCopy.DescrLimits currently attempts to test Maximum Descriptor
List Length bounds checking by issuing a request with
(max_target_desc_count + 1 + max_segment_desc_count + 1) descriptors.
Maximum Descriptor List Length is a separately advertised field, that
may not be exceeded with the above logic, e.g. LIO advertises:
- Max Target Desc Count = 2
- Max Segment Desc Count = 1
- Max Desc List Len = 1024
Calculate the number of descriptors using the advertised Maximum
Descriptor List Length value, to explicitly test bounds checking.
Signed-off-by: David Disseldorp <ddiss@suse.de>
We need to use iovectors for iSER to work as it requires that the vectors
are attached to the task before we queue the task.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Dispatch a write and subsequently reset the logical unit via iSCSI TMF.
This is based on the AbortTaskSimpleAsync test.
Signed-off-by: David Disseldorp <ddiss@suse.de>
When run against an iSCSI target sd->sgio_dev may be NULL, so the
strncmp() coredumps.
Fixes: 698ae7a649
Signed-off-by: David Disseldorp <ddiss@suse.de>
As BLKSECTGET is so unreliable, skip using this to detect max transfer sizes
for any device path starting with "/dev/sg"
instead force the max to be 120k
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Not all targets support cold/warm reset task management functions.
Abort these tests if the support is missing and the commands fail.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
The iscsi cmdsn tests are noisy and generate a lot of [FAILURE]
warnings for things that are expected.
Fix this by do the plumbing to allow using a EXPECT_STATUS_TIMEOUT
for commands we expect will never be replied to and will thus time out.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
The current WRITE SAME (WS) 0 blocks test at LBA 0 isn't always correct
because if:
- The target's WSNZ bit set is 0
- The target's MAXIMUM WRITE SAME LENGTH (MWSL) is greater than 0
- We are issuing a WS with a NUMBER OF LOGICAL BLOCKS of 0
then whether the command should return success or failure depends on
whether the starting LBA is within MWSL blocks of the end of the LUN
(see http://www.t10.org/pipermail/t10/2016-May/017988.html for details).
Replace the vestigial code which tried to handle this (but no longer
worked since commit 8585e4509b ) and add
some additional MAXIMUM WRITE SAME LENGTH tests.
Signed-off-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Based on the corresponding simple tests. Issue a WRITESAME request and
confirm that the data written matches the data read back.
Signed-off-by: David Disseldorp <ddiss@suse.de>
There is technically no reason why a SSD with (assumingly with thin
provisioning) can not support SANITIZE/OVERWRITE instead or or in addition
to the more expected SANITIZE/BLOCK-ERASE so remove the warning for this.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
