Check for 0x0A descriptor support via SCSI_COPY_RESULTS_OP_PARAMS. If
supported, perform a 0x0A type XCOPY using target's
maximum_segment_length (or 256M if larger).
Signed-off-by: David Disseldorp <ddiss@suse.de>
Type 0x0A segment descriptors provide a 32-bit wide number-of-bytes
field, allowing for much larger copy offloads with a single segment
descriptor.
Signed-off-by: David Disseldorp <ddiss@suse.de>
The SPC4r37 specification defines XCOPY Segment Descriptor lengths for
each SD type. The spec defined SD lengths don't account for the four SD
header bytes. To make it easier to match the spec to the implementation,
use the spec defined lengths in get_desc_len() with a four byte SD
header addition.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Declare dynamically allocated strings as 'char *' instead of 'const char *'.
Remove the discard_const() macro. Do not test whether or not a pointer is
NULL before calling free() because it is allowed to pass NULL to free().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Since the test tool can't proceed in a meaningful way if the block size
is zero, give up if the SCSI target reports that the block size is zero.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Without this, linking fails on Fedora rawhide. Example:
...
/usr/bin/ld: test_async_lu_reset_simple.o:/root/libiscsi/libiscsi.git/test-tool/iscsi-support.h:59: multiple definition of `param_list_len_err_ascqs'; iscsi-test-cu.o:/root/libiscsi/libiscsi.git/test-tool/iscsi-support.h:59: first defined here
/usr/bin/ld: test_async_lu_reset_simple.o:/root/libiscsi/libiscsi.git/test-tool/iscsi-support.h:58: multiple definition of `invalid_cdb_ascqs'; iscsi-test-cu.o:/root/libiscsi/libiscsi.git/test-tool/iscsi-support.h:58: first defined here
...
Signed-off-by: Cole Robinson <crobinso@redhat.com>
In my tests I hit a stack overflow caused by infinite recursion of
.queue_pdu() calls, caused by .queue_pdu() not being restored in an
error path. Make the approach for restoring .queue_pdu() more robust.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
iscsi_logout_sync in lu_reset_simple will still refer to wtask in the
case that we bail out due to reconnect failure.
abort_simple would sometimes refer to wtask during iscsi_logout_sync,
even if the test passed.
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Since it is easy to trigger a stack overflow with variable-length arrays,
use dynamic memory allocation instead of VLAs. Add -Wvla to the compiler
options such that no new VLAs get introduced.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
The iSCSICHAP.Simple test ensures that CHAP_A comma separated lists
are correctly handled. iSCSICHAP.Invalid tests a range of invalid
CHAP_A parameters.
Signed-off-by: David Disseldorp <ddiss@suse.de>
For now this only changes iSCSIDataSnInvalid to use
iscsi_pdu_set_datasn() instead of scsi_set_uint32().
iSCSICmdSnTooHigh/Low changes should also be possible, as noted, but
haven't been converted yet.
Signed-off-by: David Disseldorp <ddiss@suse.de>
libiscsipriv.la exposes all symbols, so allows tests to perform low
level PDU manipulation, etc. without duplicating code.
As a trade-off, this results in a larger iscsi-test-cu, with libiscsi.so
linking removed.
Link: https://github.com/sahlberg/libiscsi/issues/297
Signed-off-by: David Disseldorp <ddiss@suse.de>
All users have now been changed to overload via the iscsi_ctx transport
callback, so the dlsym based overloading can now be dropped.
Signed-off-by: David Disseldorp <ddiss@suse.de>
In preparation for removing the test-tool iscsi_queue_pdu() dlsym
overload hack, convert this test to use the regular transport driver
callback for this purpose.
Signed-off-by: David Disseldorp <ddiss@suse.de>
In preparation for removing the test-tool iscsi_queue_pdu() dlsym
overload hack, convert this test to use the regular transport driver
callback for this purpose.
Signed-off-by: David Disseldorp <ddiss@suse.de>
In preparation for removing the test-tool iscsi_queue_pdu() dlsym
overload hack, convert this test to use the regular transport driver
callback for this purpose.
Signed-off-by: David Disseldorp <ddiss@suse.de>
In preparation for removing the test-tool iscsi_queue_pdu() dlsym
overload hack, convert this test to use the regular transport driver
callback for this purpose.
This commit also removes a number of unnecessary "WRITE10 is not
implemented" checks, which should all be caught by the first check.
Signed-off-by: David Disseldorp <ddiss@suse.de>
In preparation for removing the test-tool iscsi_queue_pdu() dlsym
overload hack, convert this test to use the regular transport driver
callback for this purpose.
Signed-off-by: David Disseldorp <ddiss@suse.de>
In preparation for removing the test-tool iscsi_queue_pdu() dlsym
overload hack, convert this test to use the regular transport driver
callback for this purpose.
Signed-off-by: David Disseldorp <ddiss@suse.de>
In preparation for removing the test-tool iscsi_queue_pdu() dlsym
overload hack, convert the Compare&Write InvalidDataOutSize test to use
the regular transport driver callback for this purpose.
Signed-off-by: David Disseldorp <ddiss@suse.de>
wr_buf was hardcoded with blocksize 512, resulting in incorrect behavior
for larger block sizes, and buffer overflow. Use the block_size global.
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
clear_pr() can be called before connect_scsi_device() has been invoked
on each MPIO sdev. This results in a NULL pointer dereference in the
send_scsi_command() MPIO NOP-responder code-path.
Fix this by invoking clear_pr() after the MPIO connect_scsi_device()
loop has run. clear_pr() also only needs to be invoked via a single
path, so do so via the first path only.
Link: https://github.com/sahlberg/libiscsi/issues/289
Fixes: 16435a9 ("iscsi-test-cu: Improve persistent reservation clearing")
Signed-off-by: David Disseldorp <ddiss@suse.de>
Clear persistent reservations before sending the first SCSI command to the
target to avoid that that command fails due to persistent reservations left
behind by a previous run of the test tool.
Avoid that a subsequent test fails if a test did not remove the persistent
reservations it obtained.
Make sure that clear_pr() returns -1 if clearing persistent reservations
fails.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
When target claim it support maximum writesame length to the total blocks number, when
we trigger 0blocks writesame opertion, we should expect it to be succeed instread of failure.
This test registers PR key and then sends a PR-In read-keys request with
an ALLOCATION LENGTH value that forces response truncation. Ensure that
the ADDITIONAL LENGTH is *not* modified as a result of the truncation.
This test currently passes against TGT but fails against LIO (fix
pending).
Signed-off-by: David Disseldorp <ddiss@suse.de>
Accepting an Allocation Length parameter allows us to test for
truncation of response data, as per SPC5r17 4.2.5.6:
The device server shall terminate transfers to the Data-In Buffer when
the number of bytes or blocks specified by the ALLOCATION LENGTH field
have been transferred or when all available data have been
transferred, whichever is less.
With this change, all existing prin_read_keys() callers continue to use
same ALLOCATION LENGTH value as earlier (16K).
Signed-off-by: David Disseldorp <ddiss@suse.de>
The helper function -2 return paths already print this message, so the
duplicate in the caller can be dropped.
Signed-off-by: David Disseldorp <ddiss@suse.de>
