- Replace some u_int32_t with uint32_t
- Portability fixes to iscsi-perf
- Improved documentation for the tests in README
- Add/fix support for setting task/pdu timeouts and add unit tests for it.
- Add multipath helpers for the test suite and add a simple multipath test
- Skip sending TUR during reconnect, since it can cause the connection to
- hang.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Add a test to verify the pdu timeout handling.
Fix numerous bugs in the timeout handling. It was really broken.
Add test for non-SCSI task PDUs too and verify they works.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
- Add support to use /dev/* nodes instead of just iscsi devices.
- Create a dedicated test for the FUA/DPO flags
- Allow reusing the context after disconnect
- Fix non-randomness in rand_key()
- Add iscsi-perf tool
- Fix length bug when sending unsolicited data in iscsi_command
- Reqrite the reconnect logic to begome fully async
- Fix wrong checks for username in CHAP
- Support Bidirectional CHAP
- Improve handling of IMMEDIATE bit
- Cmdsn, statsn fixes+
- iscsi_which_events can return 0, which means that there are no events right
now but try again in a second or so.
- Ignore any ASYNC EVENTS we receive since we can not yet pass them back to
the application.
- Add initial make test support
- Various minor fixes to libiscsi and the test suite
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
this variable was introduced for iscsi-test-cu only. This patch
makes it a generic environment variable that can be set per context.
Signed-off-by: Peter Lieven <pl@kamp.de>
Disable memory caching in libiscsi if the environment variable
LIBISCSI_CACHE_ALLOCATIONS has been set to zero. This makes
Valgrind reports more meaningful.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
We allowed iscsi to be NULL in iscsi_parse_url. Especially
qemu does this and currently segfaults at start. Change the
usage guidelines for target username/password to be the same
as for chap username/password.
Signed-off-by: Peter Lieven <pl@kamp.de>
Some targets return multiple TargetAddress for individual targets.
Create a linked list of addresses for each target instead of
failing the discovery process when this happens.
Assume target names are URL encoded with '%' as the special character.
Any sequence of '%' followed by two bytes in the target name will be replaced
with the byte that the second two bytes represent in hexadecimal.
Example
iqn.ronnie.test%3A1234
will be translated to iqn.ronnie.test:1234
Default to 0 meaning no timeout.
Implement a test for iSCS to test what happens if we send a command
with CMDSN being higher than the target allows.
In this case we dont strictly know what will happen, just that what should
NOT happen is the target responding with success.
But we have to be prepared for any kind of failure, including a timeout,
scsi sense, or even iscsi reject or session failure.
iscsi_data.size is used as parameter to memory
operation functions (such as malloc) which except
size_t rather than int.
Signed-off-by: Peter Lieven <pl@kamp.de>
Add support for BUSY status coide from the target and just pass this
back to the application as is (instead of converting it to _ERROR).
This allows the application to trap task->status==SCSI_STATUS_BUSY and
decide what/how to proceed.
This patch adds the abilitiy to libiscsi to count the number
of consecutive outstanding NOPs.
With this ability its fairly easy to implement a keepalive
check with NOPs in your application.
Periodically (e.g. every 5 secs) create a NOP-Out with:
iscsi_nop_out_async(iscsi, NULL, NULL, 0, NULL);
At that time check the number of consecutive missing NOP-Ins
with
iscsi_get_nops_in_flight(iscsi) > N.
Where N is the number of missing NOP-Ins you will allow.
Please note that it is legitime for the Target to ignore
a NOP if the load is very high as those packet are mark
as IMMEDIATE.
Signed-off-by: Peter Lieven <pl@kamp.de>
In specific situation it might be useful to give up if a reconnect
is not successful or after a given number reconnect retries.
This patch adds the ability to change that. The default remains
the same: retry forever.
Signed-off-by: Peter Lieven <pl@kamp.de>
As part of the test also validate the PDU that libiscsi generates and verify that
1, the PDU we send has the F flag set
2, that datasegmentlength for the PDU is one block
This patch defines an scsi_iovec struct which is guaranteed
to be POSIX compatible. It furthermore adds support for
in+out iovectors for bi-directional operations
Signed-off-by: Peter Lieven <pl@kamp.de>
If an application passes buffers to libiscsi for reading they are
currently added to a linked list one by one. This leads to a malloc
for each buffer object plus O(n) walks trough the list to add
the buffer to then end of the list. Additionally the buffer read
routine takes up to O(n) iterations to find the right buffer
for a request.
This patch introduces an scsi_iovector struct to pass buffers to
an scsi task. Adding a new buffer is in O(1) and finding the
right buffer to also. Malloc requirements are in O(log(n)).
Additionally the scsi_iovector struct is itended to be binary
compatible to an QEMUIOVector allowing to pass this structure
directly to the library.
Initial tests have been made booting an Ubuntu LTS 12.04.1
Desktop server up to the login prompt. The following observations
have been made with regards to scsi_malloc calls:
original implementation: ~11.500 mallocs
using iovector instead of list: ~ 7.500 mallocs
passing the iovector directly: 0 mallocs
To enable this feature in qemu for testing the following patch might
be used:
diff --git a/block/iscsi.c b/block/iscsi.c
index a6a819d..2809c15 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -390,11 +390,16 @@ iscsi_aio_readv(BlockDriverState *bs, int64_t sector_num,
return NULL;
}
+#if defined(LIBISCSI_FEATURE_IOVECTOR)
+ assert(sizeof(struct QEMUIOVector) == sizeof(struct scsi_iovector));
+ scsi_iovector_assign(acb->task, (struct scsi_iovector*) acb->qiov);
+#else
for (i = 0; i < acb->qiov->niov; i++) {
scsi_task_add_data_in_buffer(acb->task,
acb->qiov->iov[i].iov_len,
acb->qiov->iov[i].iov_base);
}
+#endif
iscsi_set_events(iscsilun);
---
Signed-off-by: Peter Lieven <pl@kamp.de>
The memory tracking code reports memory allocated by iscsi_allocate_pdu_with_itt_flags_size() as lost.
This memory is allocated by the iscsi part of libiscsi, but later freed by the lowlevel scsi part. We
will fix this later by introducing an iscsi_task object.
These two functions belong in the iscsi layer, not the scsi layer so move them
out from scsi-lowlevel.c so that we can start turning scsi-lowlevel.c to a pure
scsi layer and remove all dependencies to iscsi from it.
DPRINTF was blindly sending all debug output to fd 2 (stderr).
The new function iscsi_set_debug_fd() will set the debug fd.
In general debugging is completely disabled by default.
This patch adds logarithmic malloc behaviour to iscsi_add_data().
Currently for each new call there is a new buffer allocated
and all old data is copied to the new buffer. Change this by
allocating at least PAGE_SIZE bytes and increase the allocation
by powers of 2 each time it does no longer fit.
This patch adds a wrapper around all memory allocations and frees.
The idea is to get warned immediately if the application leaks memory.
Additionally the wrapper functions make it easy to add different
memory allocators or memory pools in the future.
