Ronnie Sahlberg
98b0a757b2
R2T: Reset datasn to 0 everytime we start a new sequence from r2t
2012-08-01 13:44:03 +10:00
Ronnie Sahlberg
1f98c40edf
DATASN: We have to increment DATASN in each DATA-OUT PDU in a sequence.
...
For writes that span across multiple DATA-OUT segments we have to
increment the DATASN field for each segment.
We didnt use to, and most targets were perfectly happy, ignoring that the DATASN was constant 0 for every DATAOUT we sent.
LIO however does check this and did cause it to reject the libiscsi test tool.
(This is something we should write a iscsi test for so we can flag all non-LIO targets as broken and needing to be fixed)
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-08-01 13:30:13 +10:00
Ronnie Sahlberg
2a15e39460
Add a new sense code
2012-07-30 07:38:38 +10:00
Ronnie Sahlberg
9986cd85d7
ISCSI: Support devices with more than 255 LUNs
2012-07-25 13:24:55 +10:00
Ronnie Sahlberg
fbc4f3584b
TEST: Add initial test for "test that all mandatory SBC commands are there"
...
Some tests are just stubs since we underlying vommands have not been
implemented in libiscsi yet.
2012-07-22 08:52:25 +10:00
Ronnie Sahlberg
458c342839
typo
2012-07-22 07:37:04 +10:00
Ronnie Sahlberg
94cd6bf3b1
TEST: Add test that PREVENTs on different IT_Nexuses do not interfere
2012-07-21 15:04:53 +10:00
Ronnie Sahlberg
af9d3eab79
fix a typo
2012-07-21 12:27:51 +10:00
Ronnie Sahlberg
d8ed7d4053
TESTS, After a target/lun reset, wait until the lun stabilizes before continuing the tests
2012-07-21 12:26:24 +10:00
Ronnie Sahlberg
9205a71135
fix typo in test, we try to reset the LUN, not the target
2012-07-21 12:09:59 +10:00
Ronnie Sahlberg
313d579464
TEST: Add a test that a LUN reset will clear PREVENTALLOW
2012-07-21 12:05:25 +10:00
Ronnie Sahlberg
ca046ab342
TEST: add a test that a Cold Reset will clear PREVENTALLOW
2012-07-21 11:59:34 +10:00
Ronnie Sahlberg
7d0393452c
TEST: Add a test that PREVENTALLOW is cleared byb a warm reset
2012-07-21 11:53:26 +10:00
Ronnie Sahlberg
44bf8a5a3a
TEST: Add a test that a I_T_Nexus loss clears the PREVENTALLOW on that nexus
2012-07-21 11:17:09 +10:00
Ronnie Sahlberg
5953607743
TEST: add test that we can not eject media when PREVENTALLOW is set on the I_T_nexus
2012-07-21 10:43:33 +10:00
Ronnie Sahlberg
43bf059fca
Add ASCQ for MEDIUM_REMOVAL_PREVENTED
2012-07-21 10:28:32 +10:00
Ronnie Sahlberg
5cf3ccca75
TEST: Add simple test for PREVENTYALLLOWMEDIUMREMOVAL
2012-07-21 10:04:37 +10:00
Ronnie Sahlberg
b8e08a355d
TESTS: Add test for all media access commands that they fail correctly on ejected media
2012-07-18 08:03:29 +10:00
Ronnie Sahlberg
16da01ed4e
Add PREVENTALLOWMEDIUMREMOVAL support
2012-07-17 18:12:03 +10:00
Ronnie Sahlberg
4a3935770d
TEST Add test for powercondition and eject
2012-07-16 21:43:27 +10:00
Ronnie Sahlberg
db68e68f6d
TEST: add simple test for STARTSTOPUNIT
2012-07-16 21:06:52 +10:00
Ronnie Sahlberg
1f40de8858
compiler warnings
2012-07-15 08:13:40 +10:00
Ronnie Sahlberg
025136e81c
Add support for STARTSTOPUNIT command
2012-07-15 08:10:39 +10:00
Ronnie Sahlberg
e6ca1451b0
TEST add test for wrprotect field in ORWRITE
2012-07-14 18:38:48 +10:00
Ronnie Sahlberg
6bbbff64fd
Add some missing free calls
2012-07-14 18:10:04 +10:00
Ronnie Sahlberg
67f4ceca6b
Add COMPAREANDWRITE and ORWRITE to the readonly tests
2012-07-14 17:55:10 +10:00
Ronnie Sahlberg
030cb9134a
Add lba-out-of-range tests for ORWRITE
2012-07-14 17:45:43 +10:00
Ronnie Sahlberg
1a7a92024e
Fix typo in orwrite test
2012-07-14 17:30:57 +10:00
Ronnie Sahlberg
1ce5d97e57
TEST: Add test for ORWRITE command
2012-07-14 17:29:58 +10:00
Ronnie Sahlberg
11f7da678b
Add support for ORWRITE
2012-07-14 17:01:38 +10:00
Ronnie Sahlberg
bee944c3cc
update log message
2012-07-14 13:17:13 +10:00
Ronnie Sahlberg
b5a6f7c3cb
Bugfixes for the compare and write tests
2012-07-14 13:15:45 +10:00
Ronnie Sahlberg
17e3355dc2
TEST: Add tests for COMPAREANDWRITE
2012-07-14 13:06:24 +10:00
Ronnie Sahlberg
017bb69ccd
Add new sense code for miscompare during verify
2012-07-14 12:49:42 +10:00
Ronnie Sahlberg
bac1d4d7af
We need to allow >uint8_t as xferlen since this is in unit of bytes, not blocks in the libiscsi api
2012-07-14 12:31:38 +10:00
Ronnie Sahlberg
bdd6e6bb11
Add support for COMPARE_AND_WRITE command
2012-07-14 11:34:40 +10:00
Ronnie Sahlberg
f6705d4691
TESTS: Add tests for writing beyond the end of the LUN for WRITEVERIFY10/12/16
2012-07-14 10:54:15 +10:00
Ronnie Sahlberg
477ee0f6f6
TEST: Add wrprotect tests for WRITEVERIFY10/12/16
2012-07-14 08:54:00 +10:00
Ronnie Sahlberg
df30827992
Add simple tests for WRITEVERIFY10/12/16
2012-07-14 08:41:04 +10:00
Ronnie Sahlberg
bae5ce4c14
TESTS: Add test that WRITEVERIFY* fails if the device is write-protected
2012-07-14 08:24:19 +10:00
Ronnie Sahlberg
29f5e9378f
Add support for WRITEVERIFY10/12/16
2012-07-14 08:19:43 +10:00
Ronnie Sahlberg
1745f76bef
Add SYNCHRONIZECACHE16 support
2012-07-13 10:19:44 +10:00
Ronnie Sahlberg
eaff5a4e4e
TESTS: Add a test that write/unmap fails on read-only devices
2012-07-13 10:04:42 +10:00
Ronnie Sahlberg
a34874289b
Add ascq for WRITE_PROTECTED
2012-07-13 09:43:21 +10:00
Ronnie Sahlberg
3221e631c0
MODE_SENSE Add sync version of mode sense 6
2012-07-13 09:33:41 +10:00
Ronnie Sahlberg
6f4afb6edb
MEDIUM_NOT_PRESENT/TRAY-CLOSED/TRAY_OPEN is not an error that blocks a successful connect
2012-07-12 18:55:35 +10:00
Ronnie Sahlberg
837779541c
SG3-UTILS: update the sg3 utils patch
2012-07-11 15:45:17 +10:00
Ronnie Sahlberg
c251a429f3
Add more sense key strings for the error messages
...
Add all the missing sense keys to the value string table so that we can map any
key to a nice text string
2012-07-11 15:38:38 +10:00
Ronnie Sahlberg
801bfb342d
Login: dont fail the login just because there is no media in a device
...
in that case we will never reach test unit ready being successful since it will fail with NOT_READY/MEDIUM_NOT_PRESENT.
Treat this sense code as a successful login as far as the login process is concerned
2012-07-11 15:33:32 +10:00
Ronnie Sahlberg
c379a3eb27
TESTS: improve the output for some failures
2012-07-11 14:16:55 +10:00
