libiscsi

Files

Bart Van Assche f6c4a82a22 test_writesame*_0blocks.c: Include WSNZ bit in test

From the SBC-4 section about the block limits VPD page: "A write
same non-zero (WSNZ) bit set to one indicates that the device
server does not support a value of zero in the NUMBER OF LOGICAL
BLOCKS field in the WRITE SAME command CDBs (see 5.45, 5.46, and
5.47). A WSNZ bit set to zero indicates that the device server may
or may not support a value of zero in the NUMBER OF LOGICAL BLOCKS
field of the WRITE SAME commands." Hence verify that WRITE SAME
with NUMBER OF LOGICAL BLOCKS set to zero fails if WSNZ = 0.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>

2014-08-04 16:04:43 -07:00

iscsi-support.c

iscsi-test: check for invalid descriptors offsets in get_lba_status

2014-07-10 14:44:16 +02:00

iscsi-support.h

TESTS: update the get_lba_status + unmap test to account for lbppbe

2014-07-16 05:37:34 -07:00

iscsi-test-cu.c

TESTS: Add tests that get_lba_status for a single range works

2014-07-14 19:46:12 -07:00

iscsi-test-cu.h

TESTS: Add tests that get_lba_status for a single range works

2014-07-14 19:46:12 -07:00

Makefile.am

TESTS: Add tests that get_lba_status for a single range works

2014-07-14 19:46:12 -07:00

README

TEST: Add readme for the test tool

2012-09-30 08:43:56 -07:00

test_compareandwrite_miscompare.c

TESTS: CompareAndWrite are bounded by the max block setting in BlockLimits

2014-03-05 18:47:24 -08:00

test_compareandwrite_simple.c

TESTS: CompareAndWrite are bounded by the max block setting in BlockLimits

2014-03-05 18:47:24 -08:00

test_get_lba_status_beyond_eol.c

TESTS: Add beyond eol test for GET_LBA_STATUS

2013-02-18 18:11:05 -08:00

test_get_lba_status_simple.c

Fixup the get-lba-status tests

2013-02-13 18:21:13 -08:00

test_get_lba_status_unmap_single.c

TESTS: don't check that UNMAP actually unmapped the blocks

2014-07-23 17:22:16 -07:00

test_inquiry_alloc_length.c

Type: print correct sizes we test for for std inquiry page

2013-05-29 19:26:11 -07:00

test_inquiry_block_limits.c

Fix segv.

2013-10-12 23:51:16 +02:00

test_inquiry_evpd.c

TEST: Add test for EVPD bit for INQUIRY commands

2013-03-12 18:29:24 -07:00

test_inquiry_mandatory_vpd_sbc.c

TEST: Add test that all mandatoryb VPD pages are available on SBC devices

2013-03-12 19:26:39 -07:00

test_inquiry_standard.c

TEST: INQUIRY, request 260 bytes of data when reading the standard VPD page.

2013-05-25 06:53:48 -07:00

test_inquiry_supported_vpd.c

TESTS: keep the unmarshalled std inq structure around

2013-05-11 17:07:59 -07:00

test_inquiry_version_descriptors.c

TESTS: Warn not fail if inquiry descriptors do not contain SPC* or SBC*

2014-03-06 20:30:00 -08:00

test_iscsi_cmdsn_toohigh.c

Spelling fixes: Dont => Don't

2013-12-16 18:19:24 -08:00

test_iscsi_cmdsn_toolow.c

Spelling fixes: Dont => Don't

2013-12-16 18:19:24 -08:00

test_iscsi_datasn_invalid.c

TESTS: Clear iscsi_local_iscsi_queue_pdy pointer before we return from the test.

2014-03-03 17:25:24 -08:00

test_mandatory_sbc.c

Add a test for mandatory opcodes for SBC devices.

2013-04-21 14:50:41 -07:00

test_modesense6_all_pages.c

Add POWER_CONDITION modepage marshalling/unmarshalling

2013-07-20 15:35:38 -07:00

test_modesense6_residuals.c

Spelling fixes: Dont => Don't

2013-12-16 18:19:24 -08:00

test_nomedia_sbc.c

TESTS: keep the unmarshalled std inq structure around

2013-05-11 17:07:59 -07:00

test_orwrite_0blocks.c

TESTS: ORWRITE is optional, lack os support should skip the test not fail it

2013-04-26 17:52:55 -07:00

test_orwrite_beyond_eol.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_orwrite_flags.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_orwrite_simple.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_orwrite_verify.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_orwrite_wrprotect.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_prefetch10_0blocks.c

TESTS: fix PREFETCH10/16 tests

2013-04-26 18:01:04 -07:00

test_prefetch10_beyond_eol.c

TESTS: fix PREFETCH10/16 tests

2013-04-26 18:01:04 -07:00

test_prefetch10_flags.c

TESTS: fix PREFETCH10/16 tests

2013-04-26 18:01:04 -07:00

test_prefetch10_simple.c

TESTS: fix PREFETCH10/16 tests

2013-04-26 18:01:04 -07:00

test_prefetch16_0blocks.c

TESTS: fix PREFETCH10/16 tests

2013-04-26 18:01:04 -07:00

test_prefetch16_beyond_eol.c

TESTS: fix PREFETCH10/16 tests

2013-04-26 18:01:04 -07:00

test_prefetch16_flags.c

TESTS: fix PREFETCH10/16 tests

2013-04-26 18:01:04 -07:00

test_prefetch16_simple.c

TESTS: fix PREFETCH10/16 tests

2013-04-26 18:01:04 -07:00

test_preventallow_2_itnexuses.c

Fix incorrect second initiator

2013-09-25 23:05:01 +01:00

test_preventallow_cold_reset.c

TESTS: Add test for PREVENTALLOWMEDIUMREMOVAL are cleared on lun/target reset

2013-03-03 13:37:52 -08:00

test_preventallow_eject.c

TESTS: Add tests for prevent/allow medium removal

2013-03-03 10:05:57 -08:00

test_preventallow_itnexus_loss.c

TESTS: Add test for PREVENTALLOWMEDIUMREMOVAL are cleared on lun/target reset

2013-03-03 13:37:52 -08:00

test_preventallow_logout.c

test tool: Fix a memory leak in test_preventallow_logout.c

2013-10-23 05:35:01 -07:00

test_preventallow_lun_reset.c

TESTS: Add test for PREVENTALLOWMEDIUMREMOVAL are cleared on lun/target reset

2013-03-03 13:37:52 -08:00

test_preventallow_simple.c

TESTS: Add tests for prevent/allow medium removal

2013-03-03 10:05:57 -08:00

test_preventallow_warm_reset.c

TESTS: Add test for PREVENTALLOWMEDIUMREMOVAL are cleared on lun/target reset

2013-03-03 13:37:52 -08:00

test_prin_read_keys_simple.c

use scsi_get/set_uint16/32/64 in tests

2013-08-02 17:30:24 +02:00

test_prin_serviceaction_range.c

TESTS: Persistent reserve in/out are optional

2013-04-27 14:09:19 -07:00

test_prout_register_simple.c

TESTS: Persistent reserve in/out are optional

2013-04-27 14:09:19 -07:00

test_prout_reserve_access.c

TESTS: Persistent reserve in/out are optional

2013-04-27 14:09:19 -07:00

test_prout_reserve_ownership.c

TESTS: Persistent reserve in/out are optional

2013-04-27 14:09:19 -07:00

test_prout_reserve_simple.c

TESTS: Persistent reserve in/out are optional

2013-04-27 14:09:19 -07:00

test_read6_beyond_eol.c

fix capacity checks in READ(6) tests

2014-03-11 10:44:54 -07:00

test_read6_simple.c

fix capacity checks in READ(6) tests

2014-03-11 10:44:54 -07:00

test_read10_0blocks.c

Added printf format checking to logging function.

2013-02-13 18:04:51 -08:00

test_read10_beyond_eol.c

TESTS: add a flag --usb so we can clamp all i/o to at most 120k

2013-04-27 09:59:59 -07:00

test_read10_flags.c

TESTS: keep the unmarshalled std inq structure around

2013-05-11 17:07:59 -07:00

test_read10_invalid.c

Spelling fixes: Dont => Don't

2013-12-16 18:19:24 -08:00

test_read10_rdprotect.c

TESTS: Update the protection tests

2013-05-12 08:06:08 -07:00

test_read10_residuals.c

Spelling fixes: Dont => Don't

2013-12-16 18:19:24 -08:00

test_read10_simple.c

TESTS: add a flag --usb so we can clamp all i/o to at most 120k

2013-04-27 09:59:59 -07:00

test_read12_0blocks.c

TESTS: read12 is optional, should make test skip, not fail

2013-04-27 07:43:24 -07:00

test_read12_beyond_eol.c

TESTS: add a flag --usb so we can clamp all i/o to at most 120k

2013-04-27 09:59:59 -07:00

test_read12_flags.c

TESTS: keep the unmarshalled std inq structure around

2013-05-11 17:07:59 -07:00

test_read12_rdprotect.c

TESTS: Update the protection tests

2013-05-12 08:06:08 -07:00

test_read12_residuals.c

Spelling fixes: Dont => Don't

2013-12-16 18:19:24 -08:00

test_read12_simple.c

TESTS: add a flag --usb so we can clamp all i/o to at most 120k

2013-04-27 09:59:59 -07:00

test_read16_0blocks.c

TESTS update all read16 tests to fail/skip on illegal opcode depending on whether the device claims support for it or not (mandatory in sbc-3, optional prior)

2013-04-22 17:31:50 -07:00

test_read16_beyond_eol.c

Add two additional READ16-beyond-eol tests

2013-10-23 05:39:05 -07:00

test_read16_flags.c

TESTS update all read16 tests to fail/skip on illegal opcode depending on whether the device claims support for it or not (mandatory in sbc-3, optional prior)

2013-04-22 17:31:50 -07:00

test_read16_rdprotect.c

TESTS: Update the protection tests

2013-05-12 08:06:08 -07:00

test_read16_residuals.c

Spelling fixes: Dont => Don't

2013-12-16 18:19:24 -08:00

test_read16_simple.c

TESTS: add a flag --usb so we can clamp all i/o to at most 120k

2013-04-27 09:59:59 -07:00

test_readcapacity10_simple.c

Added printf format checking to logging function.

2013-02-13 18:04:51 -08:00

test_readcapacity16_alloclen.c

fix typo

2013-04-22 17:38:10 -07:00

test_readcapacity16_protection.c

TESTS: Make READCAPACITY16PI test more verbose under -V

2013-05-14 20:29:20 -07:00

test_readcapacity16_simple.c

TESTS: ReadCapacity16 is also mandatory in SBC-2 when INQ->PROTECT is set.

2013-05-12 21:19:51 -07:00

test_readonly_sbc.c

TESTS: ORWRITE is optional, lack os support should skip the test not fail it

2013-04-26 17:52:55 -07:00

test_report_supported_opcodes_one_command.c

TESTS: ReportSupportedOpcodes return the opcode itself as data[0], not 0xff

2014-02-24 19:04:58 -08:00

test_report_supported_opcodes_rctd.c

TESTS: Improve the REPORT SUPPORTED OPCODES test for RCTD and also verify that

2013-05-18 14:00:25 -07:00

test_report_supported_opcodes_servactv.c

remove extraneous and incorrect log message from a test

2013-05-18 16:34:08 -07:00

test_report_supported_opcodes_simple.c

TESTS: Add some REPORT SUPPORTED OPCODES tests

2013-05-18 13:56:02 -07:00

test_reserve6_2initiators.c

test tool, RESERVE(6) tests: Avoid leaking 'iscsi2'

2013-10-23 05:33:35 -07:00

test_reserve6_itnexus_loss.c

test tool, RESERVE(6) tests: Avoid leaking 'iscsi2'

2013-10-23 05:33:35 -07:00

test_reserve6_logout.c

test tool: Fix a memory leak in test-tool/test_reserve6_logout.c

2013-10-23 05:35:22 -07:00

test_reserve6_lun_reset.c

test tool: Fix a memory leak in test_reserve6_lun_reset.c

2013-10-23 05:37:55 -07:00

test_reserve6_simple.c

TESTS: Add RESERVE6/RELEASE6 tests

2013-03-21 19:41:32 -07:00

test_reserve6_target_cold_reset.c

test tool, RESERVE(6) tests: Avoid leaking 'iscsi2'

2013-10-23 05:33:35 -07:00

test_reserve6_target_warm_reset.c

test tool, RESERVE(6) tests: Avoid leaking 'iscsi2'

2013-10-23 05:33:35 -07:00

test_sanitize_block_erase_reserved.c

TESTS: UNMAP make sure we read the blocks back as 0 after unmap

2013-07-05 19:34:56 -07:00

test_sanitize_block_erase.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_sanitize_crypto_erase_reserved.c

TESTS: UNMAP make sure we read the blocks back as 0 after unmap

2013-07-05 19:34:56 -07:00

test_sanitize_crypto_erase.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_sanitize_exit_failure_mode.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_sanitize_invalid_serviceaction.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_sanitize_overwrite_reserved.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_sanitize_overwrite.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_sanitize_readonly.c

Fix incorrect second initiator

2013-09-25 23:05:01 +01:00

test_sanitize_reservations.c

Fix incorrect second initiator

2013-09-25 23:05:01 +01:00

test_sanitize_reset.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_startstopunit_noloej.c

TESTS: keep the unmarshalled std inq structure around

2013-05-11 17:07:59 -07:00

test_startstopunit_pwrcnd.c

TESTS: keep the unmarshalled std inq structure around

2013-05-11 17:07:59 -07:00

test_startstopunit_simple.c

Corrected the log

2014-01-24 11:39:25 +08:00

test_testunitready_simple.c

Added printf format checking to logging function.

2013-02-13 18:04:51 -08:00

test_unmap_0blocks.c

Added printf format checking to logging function.

2013-02-13 18:04:51 -08:00

test_unmap_simple.c

- test_unmap_simple: was assuming that zero buffer was already cleared, which is not guaranteed and resulted in spurious failures

2014-05-07 13:32:21 -04:00

test_unmap_vpd.c

TESTS: Add tests for WriteSame10/16 UNMAP.

2013-05-14 22:55:05 -07:00

test_verify10_0blocks.c

TESTS: add a flag --usb so we can clamp all i/o to at most 120k

2013-04-27 09:59:59 -07:00

test_verify10_beyond_eol.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify10_flags.c

TESTS: add a flag --usb so we can clamp all i/o to at most 120k

2013-04-27 09:59:59 -07:00

test_verify10_mismatch_no_cmp.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify10_mismatch.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify10_simple.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify10_vrprotect.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify12_0blocks.c

TESTS: add a flag --usb so we can clamp all i/o to at most 120k

2013-04-27 09:59:59 -07:00

test_verify12_beyond_eol.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify12_flags.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify12_mismatch_no_cmp.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify12_mismatch.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify12_simple.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify12_vrprotect.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify16_0blocks.c

TESTS: add a flag --usb so we can clamp all i/o to at most 120k

2013-04-27 09:59:59 -07:00

test_verify16_beyond_eol.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify16_flags.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify16_mismatch_no_cmp.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify16_mismatch.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify16_simple.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_verify16_vrprotect.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_write10_0blocks.c

TESTS: add a flag --usb so we can clamp all i/o to at most 120k

2013-04-27 09:59:59 -07:00

test_write10_beyond_eol.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_write10_flags.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_write10_residuals.c

test_write*_residuals: Fix overflow tests

2014-08-04 16:04:21 -07:00

test_write10_simple.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_write10_wrprotect.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_write12_0blocks.c

TESTS: Update WRITE10/12 to allow it to fail with invalid operation code. Both these opcodes are Optional in all SBC standards.

2013-04-23 21:29:25 -07:00

test_write12_beyond_eol.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_write12_flags.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_write12_residuals.c

test_write*_residuals: Fix overflow tests

2014-08-04 16:04:21 -07:00

test_write12_simple.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_write12_wrprotect.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_write16_0blocks.c

TESTS: WRITE16 is optional so update the tests to allow WRITE16 to be missing and just make the test be [SKIPPED]

2013-04-23 21:15:28 -07:00

test_write16_beyond_eol.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_write16_flags.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_write16_residuals.c

Spelling fixes: Dont => Don't

2013-12-16 18:19:24 -08:00

test_write16_simple.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_write16_wrprotect.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writesame10_0blocks.c

test_writesame*_0blocks.c: Include WSNZ bit in test

2014-08-04 16:04:43 -07:00

test_writesame10_beyond_eol.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writesame10_simple.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writesame10_unmap_unaligned.c

TESTS: UNMAP/WRITESAME10/16 Check LBPRZ before we read the unmapped blocks and verify they are blank.

2013-05-15 17:10:20 -07:00

test_writesame10_unmap_until_end.c

tests: use alloca when allocating scratch buffer for writesame

2014-05-20 17:52:23 -07:00

test_writesame10_unmap_vpd.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writesame10_unmap.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writesame10_wrprotect.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writesame16_0blocks.c

test_writesame*_0blocks.c: Include WSNZ bit in test

2014-08-04 16:04:43 -07:00

test_writesame16_beyond_eol.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writesame16_simple.c

Fix logging typo.

2014-01-24 18:56:54 +00:00

test_writesame16_unmap_unaligned.c

TESTS: add a flag --usb so we can clamp all i/o to at most 120k

2013-04-27 09:59:59 -07:00

test_writesame16_unmap_until_end.c

tests: use alloca when allocating scratch buffer for writesame

2014-05-20 17:52:23 -07:00

test_writesame16_unmap_vpd.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writesame16_unmap.c

tests: use alloca when allocating scratch buffer for writesame

2014-05-20 17:52:23 -07:00

test_writesame16_wrprotect.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writeverify10_0blocks.c

TESTS: WRITEVERIFY10/12/16 are all optional.

2013-04-25 17:41:13 -07:00

test_writeverify10_beyond_eol.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writeverify10_flags.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writeverify10_residuals.c

Spelling fixes: Dont => Don't

2013-12-16 18:19:24 -08:00

test_writeverify10_simple.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writeverify10_wrprotect.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writeverify12_0blocks.c

TESTS: WRITEVERIFY10/12/16 are all optional.

2013-04-25 17:41:13 -07:00

test_writeverify12_beyond_eol.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writeverify12_flags.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writeverify12_residuals.c

Spelling fixes: Dont => Don't

2013-12-16 18:19:24 -08:00

test_writeverify12_simple.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writeverify12_wrprotect.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writeverify16_0blocks.c

TESTS: WRITEVERIFY10/12/16 are all optional.

2013-04-25 17:41:13 -07:00

test_writeverify16_beyond_eol.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writeverify16_flags.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writeverify16_residuals.c

Spelling fixes: Dont => Don't

2013-12-16 18:19:24 -08:00

test_writeverify16_simple.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

test_writeverify16_wrprotect.c

Replace alloca.h with stdlib.h; the former doesn't exist on FreeBSD.

2013-09-23 11:34:06 +02:00

README

This directory contains a libiscsi based test tool.
The purpose of this test tool is to validate iscsi and scsi protocol compliance of a target.


Initiatornames and LUN-masking
==============================
If the target uses lun-masking or ACLs you need to set the target up to allow
iscsi-test access to the LUNs you want to test.
By default iscsi-test uses the following two initiator names :
  iqn.2007-10.com.github:sahlberg:libiscsi:iscsi-test
  iqn.2007-10.com.github:sahlberg:libiscsi:iscsi-test-2

Most tests only use the first name but some tests, such as the RESERVE/RELEASE
tests, will use both names.

Optionally you can use different initiatir names for your testing using the
command line flags :
  --initiator-name=iqn.<some other name>
  --initiator-name-2=iqn.<another different name>


Listing all tests and test details:
===================================
The --list argument is used to show a lost of all major tests that are available
  iscsi-test --list

To list all tests and a description of each test and subtests, use
  iscsi-test --list --info

Running tests:
==============
Running tests you need to specify which test to run using the --test argument.
This can either be the name of one specific test or a set of tests using * as
the wildcard character.

Example to run one specific test :
  iscsi-test --test="T1020_bufferoffset_invalid" iscsi://127.0.0.1/iqn.ronnie.test/1

Example to run all READ10 tests :
  iscsi-test --test="*read10*" iscsi://127.0.0.1/iqn.ronnie.test/1

Or to run every test :
  iscsi-test --test="*" iscsi://127.0.0.1/iqn.ronnie.test/1